Description
ADVANTAGES
- Lower odor than most polyaspartics
- Cures at temperatures just above freezing
- Can be applied below -20°F (-28.9°C). Will cure with special handling
- Excellent UV resistance, non yellowing and high gloss characteristics
- Excellent color stability
- Achieve a variety of colors, patterns, and logos, using decorative flakes, particles, or signs
- Excellent abrasion and impact resistance
- Available in low VOC and also in zero VOC formulation for restricted areas such as Southern California
- Micro media traction agents can be introduced into the liquid system or dispersed into the top coat
- Excellent chemical resistance, resistant to skydrol
- Resistant to hot tire peel
- Excellent coefficient of friction properties
- High build capability in lifts of 10 – 12 mils maximum
- Can be matted with a matting agent
- Bonds to virtually all substrates of any dimension,including metals, concrete, and fiberglass
- Tolerant to 300°F (149°C) for random, incidental heat contact
WHERE TO USE
- Marine protection for fiberglass, steel, concrete or wood
- UV-stable top coat
- Aircraft hangar floors
- Low temperature equipment
- Maintenance facilities
- Offshore platforms
- Industrial shop floors
- Secondary Containment
- Cooling towers
- Bridges
- Wastewater treatment applications
| PACKAGING | 2 US GAL KIT (7.57 L) or 10 US GAL KIT (37.8 L) |
| COLOR | Upon request |
| RECOMMENDED THICKNESS | Primer – 8 MILS (200 ft²/gal) Finish Coat: – over solid color : 6 MILS (266 ft²/gal) – over vinyl chips : 10 MILS (160 ft²/gal) |
| SHELF LIFE | 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards. |
| MIX RATIO, BY VOLUME | A:B = 1:1 |
| MIX RATIO, BY WEIGHT | A:B = 100:110 |
| DENSITY (KG/L) | PART A: 1.06 PART B: 1.15 MIX: 1.11 |
| POT LIFE | 15 minutes @ 77°F (25°C) |
| VOC | 0 g/L |
